Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Attaching the accessories
CAUTION!
Risk of injury!
The cleaner is very hot during and after use. Improper handling
of the cleaner may result in injury.
− Let the cleaner cool down before removing or replacing
the accessories.
Straight nozzle
1. Put the straight nozzle
so that the reference marking on the straight nozzle and the marking on the
steam nozzle meet up (see step 1 in Fig. C).
2. Turn the straight nozzle in a clockwise direction until the reference marking
on the straight nozzle aligned with the two lines on the steam nozzle
(see step 2 in Fig. C).
Round brush and bent nozzle
Both the round brush
end of the straight nozzle
the steam nozzle
(see
(see Fig. E).
16
Flexible pipe, fabric brush, cloth cover and glass
pe, fabric
e, fabri
wiper
Using the flexible pipe
Us
Usin
Before releasing the steam, direct the jet into a
container so as to remove the condensate from
the flexible pipe.
− The flexible pipe
7
nozzle
for use.
16
− The straight nozzle
fabric brush
15
can be put onto the hexagonal end of
the flexible pipe for use.
AFTER SALES SUPPORT
USA
800-223-1898
onto the hexagonal end of the steam nozzle
8
. .
direction unt
ction u
the two lines
e tw
nt nozzle
t nozzl
and bent noz
and bent nozzle
d bent n
9
10
e
(see Fig. D) or directly onto the hexagonal end of
(see Fi
(see
8
8
ee Fig. E
Fig. E). )
must be put onto the hexagonal end of the steam
, round brush
, bent nozzle
8
9
Attaching the accessories
g
end of the ste
d of the s
t nozzle and
t nozzle and t
can be put onto the hexagonal
or
10
info@electra-craft.com
USA
16
17
Publicidad
Capítulos
Tabla de contenido
