Emptying The Boiler Tank After Use - Easy Home 4133 Manual Del Usuario

4. Carefully unscrew the safety cap
completely, wait for the hissing noise created by the residual steam to stop.
5. Completely unscrew the safety cap and then remove it.
6. Slowly pour water into the boiler tank
and funnel .
12
Do not let water flow out of the boiler tank.
7. Screw the safety cap on again.
8. Reconnect the power cord to the power socket.

Emptying the boiler tank after use

Removing the safety cap after use
The cleaner is very hot after use. The safety cap
can only be removed when the steam pressure in
the boiler tank is under 0.35 bar (around 5 psi). Let
the cleaner cool down after use before emptying
the boiler tank.
1. When cleaning is done, disconnect the power cord
cleaner to cool down completely.
2. Unscrew the safety cap
3. Empty the water inside the boiler tank nside the boil
4. Screw the safety cap on again. ty cap on aga cap on a
AFTER SALES SUPPORT
USA
800-223-1898
only a little bit. Before unscrewing it
1
by using the measuring cup
4
0.35 bar (ar 0.35 bar (a
n after use after use
onnect the po nect the p
pletely. pletely.
p . . .
1 1
de the bo .
4
Emptying the boiler tank after use p y g
r use use
use. The saf se. The sa
n the stea n the steam
and allow the
5
info@electra-craft.com
USA
13
19