Dometic CK 500 Instrucciones De Montaje página 14

Installing the device
6.2 Preparing the air outlet guide
Installing the air outlet adapter
➤ Remove the air outlet connection cover (fig. 5 A, page 4).
➤ Install the air outlet adapter (fig. 5 B, page 4).
Preparing the wall-mounted cupboard
➤ Mark the middle of the hole for the air outlet hose on the wall-mounted cupboard
(fig. 6, page 5).
➤ Drill a hole in the bottom of the wall-mounted cupboard with a diameter of
75 – 80 mm.
Preparing the roof outlet
A hole must be made in a suitable place in the roof for the air outlet hose with a
diameter of 110 mm (fig. 4, page 4).
Proceed in the following way so that the roof does not come out:
➤ Firstly, using a small drill from the inside (diameter 3 – 5 mm) drill a hole through
the roof.
➤ Drill the hole from above with a diameter of 110 mm up to 2/3 of the roof
thickness.
➤ Drill all the way through the roof from below.
14
CK500
EN