Dual Zone System Setting; Bass Management System); B.m.s. Frequency Offset; Crsc (Clean Reception System Circuit) - Kenwood Ez500 Manual De Instrucciones

• When the Dual Zone System is on, there is only sound
effect including Audio control for except selected
source.
• When you set the Dual zone system to ON while the
sub woofer preout is switched ON, the sound of the
sub woofer preout isn't output.
When the Dual Zone System is OFF

Dual Zone System Setting

Setting the Front channel and Rear channel
sound in the Dual Zone System.
Display Setting
"Zone 2 Rear" The front is except the rear selected source, and
the rear is selected source sound.
"Zone 2 Front" The rear is except the front selected source, and
the front is selected source sound.
B.M.S. (Bass Management System)
Adjust the bass boost level of the external
amplifier using the main unit.
Display Setting
"AMP Bass FLT" Bass boost level is flat.
"AMP Bass +6" Bass boost level is low (+6dB).
"AMP Bass +12" Bass boost level is mid (+12dB).
"AMP Bass +18" Bass boost level is high (+18dB).
• Refer to the catalog or instruction manual for power
amplifiers that can be controlled from this unit.
• For amplifiers there are the model that can be set
from Flat to +18 dB, and the model that can be set
from Flat to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass +18" won't work
correctly even if it's selected.

B.M.S. Frequency Offset

Setting the central frequency boosted by B.M.S.
Display Setting
"AMP Freq NML" Boost with the normal central frequency.
"AMP Freq Low" Drop the normal central frequency 20%.
In FM reception
CRSC (Clean Reception System
Circuit)
Temporarily have reception switched from
stereo to mono to reduce multi-path noise when
listening to the FM station.
Display
"CRSC ON"
"CRSC OFF"
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned
ON. In such a situation, turn it OFF.
In SIRIUS tuner source

SIRIUS ID (ESN) display

Displaying the SIRIUS ID (Electronic Serial
Number) display.
Display
"ESN = ************"
• Serial & SIRIUS ID (ESN)
It is especially important to retain the unit serial
number and the electronic SIRIUS Identification
number for service activation and potential future
service changes.

Text Scroll

Setting the displayed text scroll.
Display Setting
"Scroll Auto" Repeats scroll.
"Scroll MANU" Scrolls when the display changes.
• The text scrolled is shown below.
- CD text
- Folder name/ File name/ Song title/ Artist name/
Album name
- MD title
- Text for the SIRIUS tuner source, HD Radio source,
including Channel name, etc.
Setting
The CRSC is ON.
The CRSC is OFF.
| 25
English