Preparing The Cassette Tank - Dometic Saneo B Instrucciones De Uso

Using the toilet
On the Dometic website (see back page) you can find further information about
sanitary accessories.
6.2

Preparing the cassette tank

Removing the cassette tank
Proceed as follows (fig. 3, page 2):
➤ Open the service door.
➤ Push the catch upward to unlock the cassette tank.
➤ Pull the cassette tank out of the cassette housing. When pulling out the tank,
resistance has to be overcome.
I
NOTE
When the cassette is removed, the slide handle on the toilet housing is
locked. The cassette can only be inserted when the slider is closed.
Do not pull on the slider handle when the cassette has been removed.
Adding sanitary additive
➤ Position the cassette tank upright.
➤ Rotate the drain pipe approx. 90° upward (fig. 4, page 3).
I
NOTE
Avoid turning the drain pipe more than 90°, as it otherwise can come off
(fig. 4, page 3).
➤ Twist off the cap (fig. 5, page 3).
➤ Put the cap onto the cassette (fig. 5, page 3).
➤ Add sanitary additive into the cassette tank via the drain pipe (fig. 6, page 3).
Observe the instructions for the sanitary additive.
Pushing the cassette tank into the cassette housing
A
NOTICE!
Ensure that the cassette tank can be pushed into the cassette housing
easily. Make sure that the cassette tank does not bump into other
objects or components.
➤ Slide the cassette tank all the way into the cassette housing.
20
SaneoB, SaneoC
EN