Unit Description - Beurer BC 58 Manual De Instrucciones

3. Unit description

Touch screen activation switch
The device features a touch screen display. To prevent the
screen from being activated accidentally, keep the touch
screen activation switch set to OFF when the device is not
in use. To operate the device, move the touch screen acti-
vation switch to ON. When the touch screen display is
touched (START/STOP button
is output.
Tip: You can switch off the device at any time by setting the
touch screen activation switch to the OFF position.
1. Display
2. Memory button MEM
3. START/STOP button
4. USB interface
5. Touch screen activation
switch
6. Battery cover
or MEM button), a beep
Icons in the display:
1. Time and date
2. Risk indicator
3. Systolic pressure
4. Diastolic pressure
5. Measured pulse
6. „Change battery" icon
7. Pump up, release air (arrow)
8. Memory display (
evening ( )
9. Cardiac arrhythmia icon
PC interface
The Beurer blood pressure monitor also allows you to trans-
fer your measured values to the PC.
To do this you require a USB cable (included in delivery) and
the Beurer "Health Manager" PC software.
The software can be downloaded free of charge from
www.beurer.com/service/download
System requirements for the Beurer "Health Manager"
computer software
1. Supported operating systems:
• Windows XP SP3
• Windows Vista SP1 or later
• Windows 7
• Windows 7 SP1
22
1
9
8
8
7
6
5
min
), average value ( ), morning (
2
3
4
),