VelLight LEDC11 Manual Del Usuario página 5

Step 5 – Reconnect the connector cable
 Make sure the connector is fully opened.
 Insert the cable and close the connector.
You can now close the touch panel.
5. Wiring
Wire the controller as follows:
6. Operation
On/Off
To turn the lights on or off, press
Colour patterns
With the lights on, press
 To increase speed or brightness, press
 To decrease speed or brightness, press
The available patterns are:
Mode Function
1 Static red
V. 01 – 28/03/2013
LEDC11
.
to select a colour pattern.
Comment
5
.
.
Brightness is
©Velleman nv