Know Your Snow Thrower - Sears Craftsman 536.887751 Manual Del Operador

[i]-.]_l;ralil[i]_]
KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR SNOW THROWER, Compare the illustrations with your SNOW THROWER
to familiarize yourself with the location of various controls and adjustments. Save
this manual for future reference.
Speed Shifter Lever,
Auger Drive Lever _.
Traction Drive Lever
Gas Tank
Choke
Control
Primer
Crank Assembly
Chute Deflector
Discharge
Chute
Ignition
Key
Recoil
Starter
Handle
Height Adjust Skid
Shear Pin
Scraper Bar Figure 13
Auger Drive Lever - Starts and stops
the anger and impeller (snow gathering
and throwing)
Traction Drive Lever - Propels the
snow thrower forward and in reverse.
Speed Shitter Lever - Selects the
speed of the snow thrower (6 speeds for-
ward and 2 speeds reverse),
Crank Assembly - Changes the direc-
tion of snow throwing through the dis-
charge chute.
Chute Deflector - Changes the distance
the snow is thrown,
Discharge Chute - Changes the height
and direction the snow is thrown.
Height Adjust Skid - Adjusts the ground
clearance of the auger housing.
Ignition Key - Must be inserted to start
the engine,
F_)21027L
Recoil Starter Handle - Starts the en-
gine manually.
Choke Control - Used to start a cold
engine.
Primer Button - Injects fuel directly into
the carburetor manifold for fast starts in
cold weather.
Throttle Control - Controls the engine
speed.
Electric Start Button - (if so equipped)
Used to start the engine using the 120 V elec-
tric starter.
Shear Pin - Shear pins are designed to
break (to protect the machine) if an ob-
ject becomes lodged in the auger hees-
ing.
Toolbox - spare shear pins and
spacers are located in toolbox.
12