Publicidad
The units are axial fans designed for extract ventilation
of small and medium size rooms that are heated in winter
time. Fans are made of white plastic; color of front panel
can be white or metallic.
Delivery set includes:
1. Fan - 1;
2. Screws with plugs - 4;
3. User manual;
4. Packing box.
Fans are compatible with 3 15/16" (100 mm),
4 15/16" (125 mm), and 5 7/8" (150 mm) diameter ducts.
Installation options are own on pic 1.
Fans can be mounted with 4 screws and plugs.
Fans only for wall through installation.
Fans can be mounted in the system with short straight
duct runs (max. length 3 ft). Flexible ducts should be
straight and stretched (max. length 3 ft).
Fans can be used to move air against low pressures (max.
0.03 in WG).
Models
"V"
are supplied with pull-cord switch.
Models
"T"
are supplied with adjustable timer with
delay from 2 min up to 30 min.
Models
"H"
are supplied with humidity sensor with
level of operating from 60
"Turbo"
models
are equipped with higher-power
X star fans are supplied with lightning lamp
(GU10, 120V, 60Hz, 0.3W ).
"K" fan with a back valve.
Input: 120V AC 60Hz
.
C
onnection for D, LD, LDA, S, X, X1
Fig. 3-5, mounting - on Fig. 8-14. Turning the timer and
himidity sensor of
D, S
fans
for
LD, LDA, X X1
fans are shown
C
onnection
of
X star
fans
mounting are shown on Fig. 33-43
Fans are designed for long-term operation without
disconnection from network. Air motion must
direction of indicator on the fan case. Fans can be
operated at ambient
temperatures between 40 and 170ºF.
Protection rating from access to dangerous parts and
water penetration of
D, LD, LDA, S
X1, X star fans is IР24.
%
up to 90%.
fans
are shown on
are shown on Fig.
15-21,
on Fig.
22-26.
are shown on Fig.
6-7,
.
match
fans is IР 34, of
Fan construction is constantly being improved, and
some models may differ slightly from those described
in this manual.
Fan surfaces need to be cleaned regularly from dirt
and dust ( Fig. 27-32 for D, LD, LDA, S, X, X1 fans, Fig.
44-49 for X star fans). Cleaning is made with soft cloth
with the usage of water solution and washing agent.
Ingress of liquid to electric motor must be avoided.
After cleaning the surface must be wiped dry.
WARRANTY
Production meets standard operating requirements
in the territory of the USA and Canada.
Manufacturer guarantees normal operation of the
unit
for
60 months from the
motor
.
fulfillment of transport, storage, mounting and operation
rules.
If
proof
of sales date is absent warranty period is
calculated from the
In case of occurrence of failure due to faulty
equipment
during warranty period
has the right to
The unit can be exchanged at
Bodor Vents, LLC DBA: VENTS-US
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: (513)348-3853
e-mail:
sales@ventsus.com
Manufacturer is not responsible for damages
resulting from of the unit or by gross mechanical
alteration.
Х,
Owner of the unit must follow the manual.
Do not dispose of with other trash.
date
of
resale,
production date
.
, the
consumer
exchange
it.
the following address:
subject to the
Publicidad
