FX50_User.book Page 19 Thursday, August 23, 2007 2:31 PM
3.3
Charging the battery
You can power and operate the scale using:
•
mains power supply from the AC adaptor (with the rechargeable
battery fitted); or
•
a re-chargeable battery located inside the scale.
When you connect the scale to the mains power supply using the AC adaptor
the battery charging indicator comes on to show that the power is connected
and the battery is charging.
•
Red battery charging indicator = Battery needs charging.
•
Green battery charging indicator = Battery is fully charged.
You need to fully charge the battery before the first time that you use the
scale.
If you do not use the scale over a long period of time, you need to charge the
battery every three to six months to maintain its performance.
3.4
Changing the display backlight mode
You can set the backlights for the operator and customer displays to operate
in one of these three different modes:
•
ON = always on.
•
OFF = always off.
•
AUTO = the backlight comes on when you start to use the scale.
To change the display backlight mode do the steps as follows:
1. Press the On switch
first beep.
2. Press and hold down the
second beep and the display comes on.
3. Press the
(ON, OFF and AUTO) that the scale displays in the total price display.
N
NOTE: To cancel changing the backlight mode and return to weighing
press the
4. Press the
to weighing.
FX 50 User Instructions
to turn the scale on. The scale makes the
key and release it when you hear a
key to scroll through the three backlight modes
key.
key to save the backlight mode you selected and return
3.3 Charging the battery
19