Tool Specifications
Angle sander
Part number
Rated power
Output power
No-load speed
Grinding disk dia. max.
Grinder spindle threads
Weight (without optional extras) approx.
Safety class
Machine Elements
1 Thread for auxiliary handle (3x)
2 Spindle lock
3 On/Off switch
4 Auxiliary handle
5 Grinder spindle
6 Hand protector*
7 Rubber sanding plate*
8 Sanding disc*
9 Round nut*
10 Guard, grinding cup*
11 Mounting flange*
12 Grinding cup*
13 Clamping nut*
14 Cup brush*
* Optional accessories
* Not all of the accessories illustrated or described are
included as standard delivery.
Intended Use
The machine is intended to sand and brush metal
and coated surfaces as well as to polish stone
without the use of water.
Noise/Vibration Information
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the prod-
uct are: sound pressure level: 93 dB (A); sound
power level: 106 dB (A).
Wear ear protection!
The typical weighted acceleration is 4.5 m/s
8 • 1 609 929 C78 • TMS • 01.10.01
GWS 18 U
0 601 353 0..
[W]
1 800
[W]
1 100
[rpm]
5 000
[mm]
230
M 14
[kg]
4.2
/ II
general safety notes in the enclosed booklet
must be observed. Before using for the first
time, ask for a practical demonstration.
Dust from light alloys can burn or explode. Al-
ways keep the work place clean, as blends of ma-
terials are particularly dangerous.
2
.
English - 1
GWS 21 U
0 601 353 1..
2 100
1 350
5 000
230
M 14
4.2
/ II
For Your Safety
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
If the mains cable is damaged or
cut through while working, do not
touch the cable but immediately
pull the mains plug. Never use the
machine with a damaged cable.
Wear protective glasses and ear
protection.
The dust that is produced while
working can be detrimental to
health, inflammable or explosive.
Suitable safety measures are re-
quired.
Examples: Some dusts are re-
garded as carcinogenic. Use suita-
ble dust/chip extraction and wear a
dust mask.
Wear protective gloves and sturdy
shoes.
When necessary, also wear an
apron.