Product Description And Specifications; Intended Use; Product Features - Bosch GAS 50 M Professional Manual Original

OBJ_BUCH-877-007.book Page 13 Monday, August 11, 2014 11:47 AM
 Do not use the vacuum cleaner as a seat. The vacuum
cleaner could become damaged.
 Use the mains cable and the vacuum hose carefully.
Other persons could be harmed.
 Do not clean the vacuum cleaner with a water jet point-
ed directly at it. The penetration of water into the vacuum
cleaner lid increases the risk of an electric shock.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols could have a meaning for the use of
your vacuum cleaner. Please take note of the symbols and
their meaning. The correct interpretation of the symbols will
help you to use the vacuum cleaner in a better and safer man-
ner.
Symbols and their meaning
CAUTION
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Vacuum cleaners of dust category M ac-
cording to IEC/EN 60335-2-69 for dry vac-
uuming of materials with an exposition limit
value≥ 0.1 mg/m
one's health
Fold up the vacuum lid 3 and hold it. Grasp
the folded filter 18 by the fins, pull up and
remove.
Bosch Power Tools
Product Description and Specifica-
tions
While reading the operating instructions, unfold the graphics
page for the vacuum cleaner and leave it open.

Intended Use

The machine is intended for collection, vacuuming, conveying
and separation of wood chips, as well as non-flammable dry
dusts, non-flammable liquids and water-air mixtures. The vac-
uum cleaner is dust-technically checked and corresponds
with dust category M. It is suitable for the increased demands
of industrial usage, as required in trades, industry and work-
shops.
Use the vacuum cleaner only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.

Product Features

The numbering of the product features refers to the illustra-
tion of the vacuum cleaner on the graphics page.
1 Cable holder
2 Carrying handle
3 Vacuum lid
4 Warning light
5 Airflow regulator
6 Mode selector switch
7 Socket for power tool
Read all safety warn-
8 Lock
ings and all instruc-
9 Hose connection piece
10 Vacuum hose
11 Container
12 Caster brake
13 Latch of the vacuum cover
14 Accessory storage
15 Clamp for push handle
16 Push handle
17 Dust bag
18 Folded filter
19 Motor protection filter
20 Level sensors
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
3
that are hazardous to
English | 13
1 609 92A 0XD | (11.8.14)