Receive Mode; Preset Memory; Preset Tuning - Kenwood KTC-HR100TR Manual De Instrucciones

Receive Mode

Sets the receive mode.
1
Select menu mode using the control unit.
Select the menu item.
Select the "Receive Mode"/ "HDR mode" display.
2
Open Receive mode
Press the setting button of the menu items in
the control unit for at least 1 second.
3
Set the Receive mode
Switching the setting of menu items.
Each time the button is pressed the Receive
mode switches as shown below.
Receive mode Display Operation
Analog broadcasts and digital
Auto mode "Auto"
broadcasts will be switched
automatically. When both are being
transmitted, the digital broadcast will
have priority.
Digital "Digital" Digital broadcasts only.
Analog "Analog" Analog broadcasts only.
4
Exit Receive mode
Press the [MENU] button.
5
Exit Menu mode
• Even in the "Auto" setting, an analog broadcast will be
received during the reception of a ball game mode
(non-delayed broadcast program).

Preset Memory

Putting the frequency and channel in the
memory.
1
Select the band
Press the [FM] or [AM] button.
2
Select the frequency to put in the memory
Press the [4] or [¢] button.
3
Multi key model only (#3 of Model list)
Select the preset function before.
Refer to <Station Preset Memory> of the tuner
function. See the control unit instruction manual
for its operations.
4
Put the frequency and channel in the
memory
Press the desired [1] — [6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the
memory on each [1] — [6] button.

Preset Tuning

Calling up the frequency and channel in the
memory.
1
Select the band
Press the [FM] or [AM] button.
2
Multi key model only (#3 of Model list)
Select the preset function before.
Refer to <Preset Tuning> of the Tuner function.
See the control unit instruction manual for its
operations.
3
Call up the frequency and channel
Press the desired [1] — [6] button.
• In case of the Digital broadcasting, "Linking" will be
displayed for few seconds until it is received.
• If the Sub channel is not available, "HD* Off"/ "*CH
Off" will be displayed.
• When <Receive Mode> (page 7) is set to Digital or
Analog, it cannot be received if the setting is differed
form the preset.
| 7
English