Dräger X-Am 5X00 Info Mode; Switching Off The Device; Power Supply For The Dräger X-Am 5X00; With Nimh Battery In The Dräger X-Zone 5000 - Dräger X-zone 5000 Instrucciones De Uso

Dräger X-am 5000 info mode
z Press and hold the
OK
for approx. 3 seconds in detection mode.
– Press the key successively for the next display.
OK
The peak values and the exposition values TWA and
STEV as well as additional X-zone information will
be displayed.
If there are warnings or faults, the corresponding
notes or error codes (e. g. 01) are displayed (refer to
"Fault messages" on page 42).
Info window for Dräger X-am 5000:
1
2 RF:
3 NET:
4
P\N:
1 Station number in grouping mode:
The station number is not currently supported by the
Dräger X-zone 5000.
2 Wireless status: ON/OFF:
Displays whether the wireless function of the Dräger
X-zone 5000 is switched on or off.
The wireless function can be switched on and off
using the Dräger CC-Vision PC software (refer to
"Configuring the device" on page 39).
3 Network number:
If independent wireless networks are required,
different network numbers must be assigned (refer to
"Establishing a wireless connection" on page 32).
The network number can be set using the Dräger
CC-Vision PC software (refer to "Configuring the
device" on page 39).
4 Grouping ID:
The grouping ID is not currently supported by the
Dräger X-zone 5000.
5 X-zone mode symbol
Displays whether or not there is a connection
between the Dräger X-zone 5000 and the Dräger X-
am 5000.
– If no key is pressed for 10 seconds, the Dräger X-am
5000 returns automatically to detection mode.
30
key of the Dräger X-am 5000
--
ON
005
FFFF
5

Switching off the device

When switching off the Dräger X-zone 5000, Dräger
recommends wearing hearing protection or using the
alarm-attenuation ring (order no. 83 20 110) as the
acoustic alarm is activated for a brief period.
STANDBY mode
z Switch off the Dräger X-am 5000 in the Dräger X-
zone 5000 in accordance with the instructions for
use.
– The visual and the audible alarm will be activated for
a short time before the Dräger X-zone 5000 switches
off.
– The Dräger X-zone 5000 switches to the STANDBY
mode.
OFF mode
z Release the lock at the holder.
z Remove the holder.
z If necessary, remove the Dräger X-am 5000 from the
device receptacle.
z Press the
key and the
OK
Dräger X-zone 5000 and hold down for approx.
3 seconds.
– The battery LED goes off.
– The Dräger X-zone 5000 is switched off
(OFF mode).
Power supply for the Dräger X-am 5000
with NiMH battery in the Dräger X-zone
5000:
Device mode
Dräger X-zone 5000: ON mode
Dräger X-am 5000: Switched on
Dräger X-zone 5000: STANDBY mode
Dräger X-am 5000: Switched off
Dräger X-zone 5000: OFF mode
Dräger X-am 5000: Switched off
CAUTION
key on the
Power supply for
the Dräger X-am 5000
Dräger X-am 5000 is
permanently supplied
with power.
Dräger X-am 5000 is
supplied with power
via trickle charging.
Dräger X-am 5000 is
not supplied with power.