For Your Safety; Battery And Battery Charger - Wurth Master BS 28-A Combi Instrucciones Para El Manejo

GB
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions con-
tained therein are strictly followed.
The machine must not be damp and must also not
be operated in damp surroundings.
Be careful of hidden electrical lines or gas and wa-
ter pipes. Check the working area, e. g., with a
metal detector.
Keep long hair away from the machine. Do not op-
erate while wearing loose clothing.
Wear hearing protection when drilling with im-
pact. The influence of noise can cause hearing de-
fects.
Use the supplied auxiliary handle. Loss of control
can lead to accidents.
Before each use, check the machine and battery. If
damage is detected, do not use the machine. Have
repairs performed only by a qualified technician.
Never open the machine yourself.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, flush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or
burns.
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as when
transporting and storing, always set the rotation-
al direction switch to the centre position. Other-
wise danger of injury is given when unintentionally
actuating the On/Off switch.
Ensure the switch is in the off position before in-
serting battery pack. Inserting the battery pack
into power tools that have the switch on invites ac-
cidents.

For Your Safety

For further notes on safety refer to enclosed sheet.
Convince yourself before using that the battery is
securely seated in the machine.
Do not strain the machine so heavily that it comes
to a standstill.
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
Use a clamping device to secure the workpiece be-
fore drilling.
Be careful when screwing in long screws; danger
of sliding off.
For screws, work using with a low speed.

Battery and Battery Charger

The enclosed operating instructions for the bat-
tery charger must be read carefully!
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
Allow a heated battery to cool before charging.
Protect the battery from heat and fire:
Danger of explosion! Do not place the
battery on radiators or expose to strong
sun rays for a longer time; temperatures
over 50 °C cause damage.
Do not open the battery, and protect it from im-
pact. Store in a dry and frost-free place.
When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another.
Shorting the battery terminals together may cause
burns or a fire.
Use only original Würth parts and accessories.
Do not dispose of the
battery in household
waste or discard into
fire or water.
11