Dmx Linking; D-Fi Usb Connectivity - Chauvet DJ 4BAR Quad Guía De Referencia Rápida

EN
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
Menu Map
Mode
DMX Mode
Static Colors
Automatic Programs
Auto Speed
Dimmer
Sound-Active Mode
Sensitivity
Custom Color Mixing
Control Mode

DMX Linking

The 4BAR Quad can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 494.
Master/Slave Connection
The 4BAR Quad uses the DMX data connection for its Master/Slave mode. Information about configuring the 4BAR Quad
for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
IRC-6 (Infrared Remote Control)
The 4BAR Quad can be operated with the CHAUVET IRC-6. For more information about the IRC-6, download
instructions for the IRC-6 or the 4BAR Quad User Manual from www.chauvetdj.com.

D-Fi USB Connectivity

The 4BAR Quad is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from CHAUVET DJ. Simply
set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the product's DMX Personality and
DMX Address. Further instructions for connecting and configuring this product for D-Fi USB operation are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause
damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display control/menu
buttons will be unavailable until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
3
QUICK REFERENCE GUIDE
Programming Levels
4Ch
6Ch d 1–509
19Ch
C 1–15
C 16
C--
C 17
C 18
P-- P 1–8
S-- S. 1–100
d-- L. 1–255
Snd Snd1–8
SEnS u 0–100
r. 0–255
G. 0–255
u-- b. 0–255
A. 0–255
S. 0–100
ir
SEt
out
Description
4-channel DMX mode
6-channel DMX mode
19-channel DMX mode
Static colors
3000K color temperature
4500K color temperature
5600K color temperature
Automatic programs
Program speed for P 1–8
Dimmer
Sound-active programs
Sets sound sensitivity
Custom static colors
Combine red, green, blue, and amber
Strobe rate
on
Turns infrared on or off for footswitch or
IRC-6 control
oFF
SLAV Enable Master/Slave with other BT products
dMX Enable Master/Slave with non-BT products
4BAR Quad QRG Rev. 4