JB Systems PARTY BAR Manual De Instrucciones página 9

ENGLISH

o
[SouL] Sound controlled Laser show.



o
[SouF] Sound controlled white flash show.



o
[SouM] Sound controlled mixed effects show.



Note: The sensitivity of the build-in microphone can be set by turning the [microphone sensitivity] knob on
the rear of the Bar.
3) FIXED COLOR STANDALONE MODE:
You can set a fixed color for the 4 RGB projectors together (2 flat RGB projectors + 2 RGB Derby effects)
 Press the [MENU] button until the display shows [COL].
 Press the [ENTER] button to confirm your choice.
 [COLO] will appear on the screen
 Press the [ENTER] button to enter the setup mode.
 Use the [UP/DOWN] buttons to set the intensity of the red color. [r.000] = off, [r.255] = maximum
intensity
 Press the [ENTER] button to confirm your choice and to go to the next color setting.
 Use the [UP/DOWN] buttons to set the intensity of the green color. [G.000] = off, [G.255] = maximum
intensity
 Press the [ENTER] button to confirm your choice and to go to the next color setting.
 Use the [UP/DOWN] buttons to set the intensity of the blue color. [b.000] = off, [b.255] = maximum
intensity
 Press the [ENTER] button to confirm your choice and to go to the strobe speed setting.
 Use the [UP/DOWN] buttons to set speed of the strobe effect. [S. 00] = off, [S. 99] = maximum speed
 Press the [ENTER] button to confirm your choice.
4) MASTER/SLAVE STANDALONE MODE:
When you have several Party Bars and you want them to all work synchronously, you can work in the so
called master/slave mode. To do this, just daisy-chain all the bars and make the settings of the desired
automatic or sound controlled program in the first bar of the chain (see description above). This bar is
called the Master unit. Now put all the other bars is slave mode. Once this is done, the "slave" bars will
follow the orders of the Master unit, so they work in perfect synchronicity.
To set a bar in slave mode:
 Press the [MENU] button until the display shows [SLA].
 Press the [ENTER] button to enter this mode.
 [SLAV] will appear on the display
 Press the [ENTER] button to confirm the slave mode.
JB SYSTEMS®
Press [ENTER] to confirm your setting
Press [ENTER] to select this mode.
Use the [UP] and [DOWN] buttons to select one of the 6 shows [SL01 – SL06]
Press [ENTER] to confirm your setting
Press [ENTER] to select this mode.
Use the [UP] and [DOWN] buttons to select one of the 10 shows [SF01 – SL10]
Press [ENTER] to confirm your setting
Press [ENTER] to select this mode.
Use the [UP] and [DOWN] buttons to select one of the 3 shows [SM01 – SM03]
Press [ENTER] to confirm your setting
7/87
USER MANUAL
PARTY BAR