STERWINS Battery Blower UP20 Instrucciones De Montaje página 228

5. TRANSPORTATION
FR
Transporting the machine or battery may require that you meet certain requirements specifi c to your
country. Please make sure to respect them by contacting the authorities of your country, in order to
ES
respect them all. Ensure temperature during transportation will never be out of temperature range given
on chapter storage
PT
5.1 TRANSPORT THE MACHINE
Switch the product off and remove the battery pack. Remove two tubes from the main unit if necessary.
IT
Always carry the product by its handle. Protect the product from any heavy impact or strong vibrations
which may occur during transportation in vehicles. Secure the product to prevent it from slipping or
falling over. Do not expose the product to sunlight.
EL
5.2 TRANSPORT THE LITHIUM BATTERIES
Please refer to the battery instruction manual for further details.
PL
6. WINTERING
RU
Plug out the battery from the power tool.
Before long storage please ensure the battery charge fi t to instructions provided on battery instruction
manual. Follow all instructions given on chapter storage below. We recommend using the original
KZ
package for storage or covering the product with a suitable cloth or enclosure to protect it against dust.
7. STORAGE
UA
Only store the machine and the battery in a clean, dry, ventilated place with a temperature range of 4°C
to 24°C. Cover it in order to provide added protection. We recommend using the original package for
RO
storage or covering the product with a suitable cloth or enclosure to protect it against dust. Be sure to
secure the unit while transporting
BR
7.1 STORE THE MACHINE
Plug out the battery from the power tool. Examine the unit thoroughly for worn, loose or damaged parts.
Clean the unit before storing. Do not expose the product to sunlight. Make sure the product is always
EN
protected from cold and humidity.
7.2 STORE THE LITHIUM BATTERIES
Please make sure that the battery power level is as recommended in the battery instruction manual.
Please refer to the battery instruction manual for further details.
8. MAINTENANCE
8.1 CLEANING
Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep the air vents
free of obstructions, sawdust, and wood chips. Do not spray, wash, or immerse the air vents in water.
Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong solvents
or detergents on the plastic housing or plastic components. Certain household cleaners may cause
damage, and may cause a shock hazard.
DANGER! Risk of injury due to electric shock.
Remove the battery pack before adjusting, inspecting,
cleaning or storing the blower.
230