Beper 90.115H Manual De Instrucciones página 10

Electronic kitchen scale Use instructions
LCD DISPLAY
1. Tray / housing
2. Weighing base
3. Display
4. Tare weight
5. On/off button M/A
6. Batteries case
7. Selector of weight unit (kg - lb)
USING YOUR DIGITAL SCALE
Use 4 batteries AA1.5V (before installing, please ensure that the voltage provided by the batteries
is correct).
Open the lid of the battery compartment at the back of the scale.
Put the batteries in the compartment respecting the polarity and close the lid.
Put the scale on a level table. And make sure that the table is hard enough.
Before fi rst use, check if all the parts if the scale are in good condition.
TARE FUNCTION
If you wish to weigh precisely the content of the bowl without taking in account its own weight you
have 2 possibilities:
1.Turn the scale on with an empty bowl already put on it: the scale will start at 0.
2.Turn the scale on, put an empty bowl on it, and then press the button "Tare": the scale will back to
0. You can now fi ll the bowl. Optionally you withdraw the scale before fi lling it (the scale then shows
the negative weight of the bowl). When you put back the bowl, the scale only calculates the content
of the bowl.
AUTO SHUT OFF
Put the scale evenly and then lightly press the button of "M/A" beside the LCD. If without turning off,
the scale will switch off automatically after 2 minutes.
MANUAL SHUT OFF
To maximize battery life, always press on/off again to turn off the scale after using.
Note: when display shows "0" press A/M button to turn off the scale.
6
7
10
4 3 5
1
2