DJ-Tech MIX Free Manual De Instrucciones página 4

OPERATIONS
C. Connecting the Mix Free controller
1. Remove the battery compartment cover on the back of your Mix Free and insert two
C size (LR14) batteries (not included). Replace the battery compartment cover
when you are done.
Note: Typical alkaline batteries can provide more than 10 hours of playing time
for Mix Free. If the display back light of the unit gets dim, or the wireless
connection becomes unstable, please replace with new batteries.
2. Turn on the Mix Free by switching the power switch on the
top of Mix Free to ON position. The 2 LCD displays will
show as in the right, and it is connecting to the USB
receiver.
Note: You should put the Mix Free controller close to the USB receiver when
connecting to the receiver.
3. After a few seconds, the displays of Mix Free will become
as in the right. The red LED on the USB receiver will
change from flashing slowly to permanently on, showing
that the connection is made successfully.
4. The Range of wireless connection is 15m to 20m for indoor area. When the wireless
reception is out of range, the display will show like in No. 2. Please bring the Mix
Free Controller closer to the USB Receiver for re-connection.
D. Starting up Deckadance LE
1. Double-click the Deckadance icon on your desktop (for Windows) or in your
Application folder (for Mac) to launch the software.
2. Go to the Setup page of Deckadance LE by clicking on the SETUP button in the
middle of the software.
3. You should find 2 "Mix Free" or 2 "USB Audio Device" in the MIDI list, one for
OUTPUT, one for INPUT. Activate them by clicking the buttons next to the devices.
Your setup page should look as below:
4. Exit the setup and try to move the faders on the Mix Free controller. The
corresponding faders should move accordingly.
5. Please refer to next section for function descriptions on the Mix Free controller. Or
please read the software manual in Deckadance Help for more detailed descriptions
on software functions.
3