Optional Accessories - Makita 3606 Manual De Instrucciones

Ocultar thumbs Ver también para 3606:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Trimmer guide (optional accessory)
003697
Trimming, curved cuts in veneers for furniture and the
like can be done easily with the trimmer guide. The
guide roller rides the curve and assures a fine cut.
Install the trimmer guide on the tool base with the wing
bolt (B). Loosen the wing bolt (A) and adjust the
distance between the bit and the trimmer guide by
turning the fine adjusting screw (1.5 mm or 1/16" per
turn). At the desired distance, tighten the wing bolt (A) to
secure the trimmer guide in place. When adjusting the
guide roller up or down, loosen the wing nut (C). After
adjusting it, tighten the wing nut (C) securely.
1
2
3
003699
When cutting, move the tool with the guide roller riding
the side of the workpiece.
3
003701
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or
the like. Discoloration, deformation or cracks may
result.
1. Wing bolt (B)
2. Fine adjusting
screw
3. Wing bolt (A)
4. Wing nut (C)
5. Guide roller
5
4
1. Bit
1
2. Guide roller
3. Workpiece
2
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always
using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These
accessories
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Straight & groove forming bits
Edge forming bits
Laminate trimming bits
Straight guide assembly
Trimmer guide assembly
Templet guides
Templet guide adapter
Lock nut
Collet cone 1/4"
Wrench 17
NOTE:
Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
7
or
attachments
Only use
accessory or
are

Publicidad

Tabla de contenido
loading

Tabla de contenido