User Manual; Safety Instructions; Cleaning And Maintenance - Perel EFL36 Manual Del Usuario

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Perel! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
2.

Safety Instructions

This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children shall be supervised to ensure that they do not play with the appliance.
Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids.
There are no user-serviceable parts inside the device. Refer to an authorized dealer for service
and/or spare parts.
Do not expose this device to extremely low or high temperatures.
•
Do not use as a night light in a child's bedroom.
•
High performance LED bulb. Do not look directly at the light source or Do not aim the light source to eyes..
•
• The lens may become hot if used for long periods of time.
3. Overview
Refer to the illustrations on page 2 of this manual.
1
charger
2
flash light
3
switch (flash light – night light – off)
4. Operation
Setup
The motion sensor operates more effectively at a height up to 1.5 m
Charging
Plug the charger into a wall socket. Slide the light into the charger. Charging begins immediately and stops
automatically when the battery is fully charged. For optimal results, charge the light 6 to 7 hours before using
it.
Motion sensor
• The motion sensor works when the device is in sensor mode (with the flashlight and night light turned off).
The light turns on automatically when in in the dark if it detects movement within range of the sensor. The
•
light remains on for 25 seconds (+/- 5 seconds).
If there is a power cut, the light turns on automatically (until the battery is empty).
•
Manual on/off
Press the button to switch between flashlight on – nightlight on – sensor mode/off.
5.

Cleaning and Maintenance

• Switch off and unplug both the light and charger from the wall socket before cleaning it.
V. 00 – 10/06/2014
EFL36

USER MANUAL

4
night light
5
motion sensor
3 ©Velleman nv