Viewing Picture-In-Picture; Sound Control; Using Automatic Sound Settings - Samsung LN-R2355W Instrucciones Del Propietario

Viewing Picture-in-Picture

This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot
watch one TV channel in the main screen, and a different one in the PIP screen. You can use the PIP feature to
simultaneously watch two video sources.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Press the
11. Press the EXIT button to exit.
Main

Sound Control

Using Automatic Sound Settings

You can select the type of the special sound effect to be used when watching a given broadcast.
1.
2.
3.
4.
Press the MENU button to display the menu.
Press the or button to select "Picture", then press the ENTER
Press the or button to select "PIP", then press the ENTER
Press the ENTER button.
Press the or button to select "On"
Press the ENTER button.
PIP is available only in PC mode and will be unavailable for other modes.
If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear.
Press the or button to select "Source", then press the ENTER
Select the source of the sub picture (PIP) by pressing the
press the ENTER button.
Press the or button to select "Position", then press the ENTER
Press the or buttons to select the desired PIP window position.
Press the ENTER button.
Press the or button to select "Channel", then press the ENTER
or buttons to select the desired channel in the PIP window.
Press the ENTER button.
Source: Selecting a signal source (external A/V) for PIP.
The sub picture can serve different source selections based on what the main picture is set to.
Position: Changing the position of the PIP window.
Channel: Changing the PIP channel.
The channel can be active when the sub picture is set to TV.
(O: PIP operates, X: PIP doesn't operate)
PIP Settings
Sub
TV AV1
PC O O
When the main picture is PC, the sub picture only supports TV, AV and S-VIDEO.
The sub picture does not support other input sources in this case.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to
view a game or karaoke.
While V-Chip is in operation, the PIP function cannot be used.
Press the PIP button on the remote control repeatedly to activate or deactivate the "PIP".
Press the MENU button to display the menu.
Press the or button to select "Sound", then press the ENTER
Press the ENTER button to select "Mode".
Press the or button to select the desired sound effect.
Press the ENTER button.
Press the EXIT button to exit.
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides live and full sound for movies.
Speech: Emphasizes voices over other sounds.
Custom: Selects your custom sound settings (See "Customizing the Sound", page 12).
You can also press the S.MODE button on the remote control to select one of the sound settings.
English-11
button.
or buttons and
AV2 S-Video Component1 Component2
O O X
button.
button.
button.
button.
PC DVI
X X X
button.