Makita 9564PC Manual De Instrucciones página 9

Noise
The typical A-weighted noise level determined according
to EN60745:
Model 9564PCV
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model 9565PC, 9565PCV
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model 9566PCV
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model 9566PCV
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model 9564PCV, 9565PC, 9565PCV
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been mea-
sured in accordance with the standard test method and
may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for main
applications of the power tool. However if the power
tool is used for other applications, the vibration emis-
sion value may be different.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the oper-
ator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
ENG905-1
): 81 dB (A)
pA
): 92 dB (A)
WA
): 82 dB (A)
pA
): 93 dB (A)
WA
): 84 dB (A)
pA
): 95 dB (A)
WA
ENG900-1
2
): 8.5 m/s
h, AG
2
2
): 10.0 m/s
h, AG
2
ENG902-1
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible manufac-
turer declare that the following Makita machine(s):
Designation of Machine: Angle Grinder
Model No./ Type: 9564PCV, 9565PC, 9565PCV,
9566PCV
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorized
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, MK15 8JD, England
30. 1. 2009
Tomoyasu Kato
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
Director
ENH101-14
9