Blaupunkt GTA 5350 Instrucciones De Manejo página 8

GTA 5350
Fit the amplifier in a suitable location, e.g.
beneath the seats or in the trunk (Fig. 1).
The mounting location must also be dry, and
provide sufficient ventilation for cooling of the
amplifier. Use cable grommets when pass-
ing cables through holes with sharp edges.
Use loudspeakers with an impedance of
Ω
2 to 4 (see table or installation drawing).
Observe the max. power handling specifi-
cations (music output). Do not connect the
loudspeakers to ground; only use the termi-
nals provided. The cross-section of the pos-
itive and negative cable must be at least
2
6 mm .
8
GTA 5350 amplifier
The amplifier is suitable for connection to car
radios with Cinch connector. Use the Blau-
punkt ISO Cinch adapter to connect the
amplifier to car radios with ISO connec-
tor (7 607 893 093/ 7 607 855 094).
Applications and loudspeaker
connection
5 channel
Ω
Max Power 4 :
4 x 80 Watt + 1 x 320 Watt
Ω
Max Power 2 :
4 x 125 Watt + 1 x 500 Watt
Ω
RMS Power 4 :
4 x 40 Watt + 1 x 160 Watt
Ω
RMS Power 2 :
4 x 60 Watt + 1 x 250 Watt
4 channel
Ω
Max Power 4 :
2 x 80 Watt + 2 x 320 Watt
Ω
RMS Power 4 :
2 x 40 Watt + 2 x 160 Watt
3 channel
Ω
Max Power 4 :
2 x 210 Watt + 1 x 320 Watt
Ω
RMS Power 4 :
2 x 105 Watt + 1 x 160 Watt
Frequency response 10 Hz - 30.000 Hz
Signal-to-noise
ratio
Stability
Input-sensitivity
Low-Pass filter
High-Pass filter
Dimensions
WxHxD (mm)
> 90 dB
2 Ohm
0,3 - 8 V
40 - 450 Hz
40 - 450 Hz
432 x 49,5 x 232
Fig. 3
Fig. 4
Fig. 5