Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the fuse
If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
DMX-control-channels:
DMX-512-connection:
Dimensions (LxWxH):
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Weight:
Accessory:
OMNILUX MR-16 12V/50W GX-5.3 SP 13° EXT
OMNILUX MR-16 12V/50W GX-5.3 SP 12° EXT+C
OMNILUX MR-16 12V/50W GX-5.3 MFL 24° EXZ
OMNILUX MR-16 12V/50W GX-5.3 MFL 24°EXZ+C
OMNILUX MR-16 12V/50W GX-5.3 FL 36° EXN
OMNILUX MR-16 12V/50W GX-5.3 FL 36° EXN+C
EUROLITE DMX operator 192 channels
EUROLITE DMX scan control 192 channels
Wizard-512 USB DMX software + interface
Wizard-1024 USB DMX software + interface
DMX-terminator DES-3 DMX 3-pin
Please note: Every information is subject to change without prior notice. 26.11.2008 ©
230 V AC, 50 Hz ~
max.150 W
3
3-pin XLR
195 x 135 x 105 mm
:
45° C
a
(steady state):
200° C
B
0.5 m
0.5 m
F 3,15 A, 250 V
2 kg
No. 91205300
No. 91205325
No. 91205350
No. 91205375
No. 91205400
No. 91205425
No. 70064520
No. 70064525
No. 51860102
No. 51860110
No. 51834001
25/47
00025997.DOC, Version 1.2
Publicidad
Tabla de contenido
