Hema 80.01.0072 Manual De Instrucciones página 18

PARTS DESCRIPTION
1. Main body (Fan guard + Fan
blade)
2. Tube stand
3. Handle
4. Speed buttons
5. Control box
6. Support for cable storage
OPERATING INSTRUCTIONS:
1. Plug the power cord into a suitable socket.
2. The fan is switched on by using the speed buttons on the control box: 0 = OFF, 1 = Low Speed, 2 = Medium
speed, 3 = High speed.
3. Tilting Angles: turn off the fan, then push or pull the guards to adjust the angle of airflow.
CLEANING AND STORAGE
1. Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable
from the socket.
2. Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and then dry it carefully. Always take out the mains plug first.
3. Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it occasionally
using a dry brush or vacuum cleaner.
4. Pack the appliance in its original box and place it in a dry, well-ventilated place when it is not to be used for
a long period of time.
5. If the appliance is extremely dirty, the front guard can be removed to clean. Unscrew the set screw at the
bottom of the fan guard and then open the clips to remove the front guard; wipe the front guard and fan
blade with a dry cloth. After cleaning, reassemble the appliance securely.
Environment
In compliance with the directives on Waste Electrical and Electronic Equipment, this product must not be
discarded with domestic waste but should be disposed of separately for recycling. If you wish to dispose of this
product in the future, do NOT throw it away with the household rubbish but hand it in at a specially designated
place, such as your municipal domestic chemical waste depot.
Quality
Safety and quality is very important to HEMA. We have our own laboratory, which assesses all equipment in
terms of electrical safety and ease of use, before it is included in our range. HEMA also monitors the product
quality in collaboration with the manufacturer.
Security
This HEMA item may be fitted with a plastic anti-theft strip. You will find the strip on the bottom of the product.
This strip does not influence the quality or the operation of the product and can be removed without a problem.
- 17 -