Setting Location; Setting Daylight Saving Time - Lutron QS Guía De Instalación Y Funcionamiento

Timeclock Operation

Setting Location

Main menu 1. Enter programming mode.
2. Use the Master buttons to highlight
Timeclock
Timeclock
"Timeclock" and press the OK button to
Scene setup
accept.
3. Use the Master buttons to highlight
"Location" and press the OK button to
Timeclock
accept.
4. Use the Master buttons to set your
Time & date
location by either country and city
Location
or latitude and longitude. Press the
OK button to accept.
5. Use the Master buttons to highlight
Location by
the country and press the OK button
to accept. Repeat for the state and
Country, City
closest city.
Lat/Longitude
6. The info screen will confirm that your
time and date have been saved.
7. Exit programming mode.
Country
08 : 00
USA
State
Pennsylvania
City
Philadelphia
®
(continued)
1
Saved
2 3 4 5 6

Setting Daylight Saving Time

Timeclock
Location
Set DST
DST
: 00
Yes
QS Timeclock Installation and Operation Guide 15
OK
1. Enter programming mode and
select "Timeclock". Use the Master
buttons to highlight "Set DST" and
press the OK button to accept.
2. Use the Master buttons to highlight
"YES" if your location observes
daylight saving time, or "NO" if it
does not. Press the OK button to
accept.
3. If yes, use the Master buttons to
choose either "USA 2007" (the
second Sunday in March to the first
Sunday in November), or "Other."
For "Other," follow the screens to
set start and end dates and amount
of time.
4. Press the OK button to accept. The
info screen will confirm that your
time and date have been saved.
5. Exit programming mode.
Master
buttons
OK
button
Timeclock
(back) button