Philips LFH 9120 Manual Del Usuario página 6

4 Installation
Connect the Philips power supply to the
1
main power supply.
Connect the docking station to the Philips
2
power supply.
Connect the docking station to a free USB
3
socket using the supplied USB cable.
6
5 Operation
5.1 Record directly to the PC from the
docking station
Start the recording application on your PC.
1
Make sure that the docking station is
2
connected to the PC with the USB cable.
Switch on the Digital Pocket Memo and
3
insert it into the docking slot of the docking
station and press it down firmly until it locks.
When in the docking station, the Digital
4
Pocket Memo operates like a USB
microphone, and records directly to the PC.
5.2 Recharge the batteries of the Digital
Pocket Memo
Make sure that the docking station is
1
connected to the main power supply with
the Philips power supply.
Insert the Digital Pocket Memo into the
2
docking slot of the docking station and press
it down firmly until it locks. The green LED
lights up, indicating that the batteries of the
Digital Pocket Memo are being recharged in
fast recharge mode.
Use the Digital Pocket Memo from the
3
docking station, or switch it off when not
being used.
When the green LED blinks, recharging is
4
complete and you can remove the Digital
Pocket Memo from the docking slot.
User manual