2. Place the locking ring (see figure 10). Do not turn the ring any further than necessary.
3. Push the mixture through the opening in the feeding tray (see figure 11). The device will create the
kibbeh-casing.
4. Fill the casing with the stuffing you made earlier.
FUNCTION - Preparing sausages
Whenever you wish to make sausage, follow the steps as described in the chapter 'Assembling.' Before
placing the locking ring however, place the sausage attachment (part number 12) as portrayed in figure 12.
WARNING:
•
If you wish to use a natural casing for your homemade sausage, attach it to the end of the sausage
attachment. Clamp the casing with (with the closing strip of a sandwich bag, for instance) and tie it
shut at the desired length.
CLEANING AND MAINTENANCE
1. Take the plug from the wall socket.
2. Disassemble the device by following the steps described in the chapter "Assembling" in the opposite
direction.
WARNING:
•
Clean the device after each use.
•
If you are experiencing difficulty in removing the grinding disc, place the flat edge of a spoon at the
edge between the grinding disc and the head. This way, you can tilt the grinding disc out of the head.
3. Clean the parts in warm water with soap. The device is not dishwasher-proof.
4. Clean the housing with a clean cloth moistened with a disinfectant cleaner, and dry thoroughly.
WARNING:
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the device.
•
Do not immerse the motor unit in water, or in other liquids.
•
The device is not dishwasher-proof.
29
EN