Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

H O W T O U S E
B E F O R E T U R N I N G T H E U N I T O N
Make sure the unit is fully charged.
C H A R G I N G T H E B A T T E R Y
Before turning the unit on, plug the charging cord into the charging port and the other end into a
household electrical outlet or USB port. The LED indicator will illuminate indicating that charging
is taking place. When charging is complete, the LED indicator will turn off. It takes 2 hours for a full
charge, which will provide approximately 8 hours of use, dependent on power levels used. When
the battery is getting low, the LED indicator will flash continuously for 30 seconds, indicating that
the unit needs to be recharged.
L O C K I N G T H E U N I T
You may choose to lock your body cleanser during traveling or transporting. To lock the unit, press
and hold both the
and
buttons for 2-seconds. The unit will vibrate and the LED indicator will
flash once. To unlock the unit, press and hold both the
The unit will vibrate and the LED indicator will flash once, indicating that the unit is now unlocked.
NOTE: Fully charging the unit will automatically unlock the unit when it is in Locked Mode.
6
and
buttons again for 2-seconds.
H O W T O U S E
C L E A N S I N G T R E A T M E N T R O U T I N E
• Wet your skin and apply your usual cleansing product.
• Before use, be sure the charging port cover is fully plugged into the charging port. Press and
hold the Power ON/OFF
button for 2-seconds to turn the unit on. The unit default intensity
setting is level 5.
• Gently press the unit to your skin and begin cleansing in a circular motion.
• In each of the areas cleansed, adjust the intensity to the level that is most comfortable.
• To increase the intensity, press the + button. The LED will blink 3-times to indicate it has reached
the highest level.
• To decrease the intensity, press the – button. The LED will blink 3-times to indicate it has
reached the lowest level.
• To turn the unit OFF, press and hold the Power ON/OFF
button again for 2-seconds
7

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido