Safety Instructions; General Safety - Warco SinePower MSI412 Instrucciones De Montaje

SinePower
A
NOTICE!
Failure to observe this instruction can cause material damage and
impair the function of the product.
I
NOTE
Supplementary information for operating the product.
➤ Action: This symbol indicates that action is required on your part. The
required action is described step-by-step.
✓ This symbol describes the result of an action.
Fig. 1 5, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
2

Safety instructions

The manufacturer accepts no liability for damage in the following cases:
 Faulty assembly or connection
 Damage to the product resulting from mechanical influences and excess
voltage
 Alterations to the product without express permission from the manu-
facturer
 Use for purposes other than those described in the operating manual
2.1

General safety

WARNING!
!
 Electronic devices are not toys!
Keep electrical appliances out of reach from children or infirm
persons. Do not let them use the appliances without super-
vision.
 Persons (including children) whose physical, sensory or mental
capabilities or lack of experience and knowledge prevents them
from using the appliance safely should not use this appliance
without initial supervision or instruction by a responsible person.
 Use the device only as intended.
 Do not operate the device in a damp or wet environment.
EN
Safety instructions
21