Guarantee; Disposal - Warco SinePower MSI412 Instrucciones De Montaje

Guarantee

Fault
No output voltage, green
and red LED light
The inverter switches off
when the consumer is
switched on, red Status
LED lights
11 Guarantee
The statutory warranty period applies. If the product is defective, please
contact the manufacturer's branch in your country (see the back of the
instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
12

Disposal

➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you wish to finally dispose of the product, ask your local recycling
M
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
30
Cause
Excessive load
Short circuit or electrical wiring
error
Starting current too high
SinePower
Remedy
Switch off the device.
Reduce the load.
Switch on the device.
Switch off the device.
Remove short circuit.
Check electrical wiring.
Switch on the device.
Compare the device power
with the maximum power of
the inverter.
EN