Fastening The Inverter - Warco SinePower MSI412 Instrucciones De Montaje

SinePower
The inverter has the following connections, displays and control elements:
Pos. in
fig. 1, page 3
1
2
3
4
5
6
7
Pos. in
fig. 2, page 4
1
2
6

Fastening the inverter

You can fasten the inverter using the four holders supplied.
When selecting the installation location, observe the following instructions:
 The inverter can be mounted horizontally or vertically.
 The inverter must be installed in a place that is protected from moisture.
 The inverter may not be installed in the presence of flammable materials.
 The inverter may not be installed in a dusty environment.
 The place of installation must be well-ventilated. A ventilation system
must be present for installations in small, closed spaces. The minimum
clearance around the inverter must be at least 25 cm.
 The air intake on the underside or the air outlet on the back side of the
inverter must remain clear.
EN
Element
Switches
0: device is switched off
I: device is switched on
Green Status LED: lights up when inverter is in operation
Red Status LED: indicates malfunction
USB port
MSI412, MSI424 only: Connection for external switch
Cover for 230 Vwsafety socket
Holders
Element
Connection cable for direct current
Fan
Fastening the inverter
25