JVC AA-V40EG Manual De Instrucciones página 7

DURING USE . . .
● The AC Power Adapter/Charger is specifically
designed to charge BN-V408U, BN-V416U and/
or BN-V428U Battery Packs.
● When charging a brand new Battery Pack, or one
that's been in storage for an extended period, the
Charging Indicator may not come on. In this case,
remove the Battery Pack, then reattach and try
charging again.
● If you connect the DC Cord to the DC Connector
while a Battery Pack is being charged, power will
be supplied to the camcorder and charging will
end incomplete.
● Vibration noise can sometimes be heard coming
from the inside of the AC Power Adapter/Charger.
This is normal.
● The AC Power Adapter/Charger processes
electricity internally, and will become warm
during use. This is normal. Make sure to use the
AC Power Adapter/Charger in well-ventilated
areas only.
● If the battery operation time remains extremely
short even after having been fully charged, the
battery is worn out and needs to be replaced.
Please purchase a new one.
SPECIFICATIONS
Power AC 110 V — 240 V,
50 Hz/60 Hz
Power 23 W
consumption
Output DC 7.2 V
(When charging)
DC 6.3 V
(When supplying power)
Operating 0°C — 40°C
temperature
Charging 10°C — 35°C
temperature
Dimensions 68 (W) x 38 (H) x 110 (D) mm
Weight AA-V40EG : Approx. 260 g
AA-V40EK : Approx. 340 g
, 1.2 A
, 1.8 A
EN-7