Pv Protect 1000-125 - Lorentz PSk2-7 Manual De Instalación Y Operación

10.10 PV Protect 1000-125

The LORENTZ PV Protect is a surge protective device (SPD)
to be used with PSk pump systems. It is installed on the DC
input line close to the pump controller.
The PV Protect provides an enhanced level of protection
from electrical surges (e.g. indirect lightning strikes). For
effective operation it requires a reliable ground connection.
The use of a properly sized DC disconnect switch is an
important safety measure and obligatory for a professional
installation of a solar pumping system.
CAUTION – Never use this product without
a PV Disconnect 1000-40-5!
For more information on installing, wiring and technical
specifications please refer to the PV Protect manual.
Figure 55: PV Combiner 1000-125-4
Pump Accessories Installation 67