Festool SYSROCK BR 10 Manual De Instrucciones página 6

the device. When a cable is used,
use caution when moving the ca-
ble/device combination to avoid
injury from tip-over.
11. Unplug the switching adapter and
device during lightning storms or
when the device is not in use for
longer periods of time.
12. Leave all maintenance to quali-
fied service personnel. Mainte-
nance is required when the device
has been damaged in any way,
such as switching adapter is
damaged, liquid has been spilled,
the device has been exposed to
rain or moisture, does not oper-
ate normally, or fell down.
13. To Reduce the Risk of Fire or Elec-
tric Shock, Do not Expose This Ap-
pliance To Rain or Moisture.
14. The Shock Hazard Marking and
Associated Graphical Symbol is
provided at the bottom of the de-
vice.
15. The device shall not be exposed to
dripping or splashing. No objects
filled with liquids may be placed
on the device.
16. The switching adapter should not
be removed far from the radio,
and remain easily accessible so
that during an emergency, the
6
power source can be easily re-
moved.
17. Where the MAINS plug or an ap-
pliance coupler is used as the dis-
connect device, the disconnected
device shall remain readily oper-
able.
18. The battery pack shall not be ex-
posed to excessive heat such as
direct sunlight, fire etc.
For more information read the
safety instructions provided with
your battery pack.
19. To prevent possible
hearing loss, do not
listen at high volume
levels for extended pe-
riods of time periods.
CAUTION: To reduce the risk of elec-
tric shock, do not perform any main-
tenance other than that detailed in
the operating instructions unless you
are qualified to do so.
WARNING! Warranty becomes void
once the radio housing has been
opened or any modifications or al-
terations to the radio have been
made!