Operation And Use - Fakir Prestige HL 10 Instrucciones De Uso

Do not mount within the depicted
areas !
X
X
Caution: When fitting the base as the wall holder, ensure that no curtains, towels or
other inflammable objects can be hung in front of the fan heater later on. This
could cause overheating.
10
Minimum distances ...

Operation and use

If you want to mount the fan heater on the wall:
• Select a spot near a socket, but not directly underneath it,
and ensure the minimum distances from the wall and from
the ceiling and/or floor.
• To fit the wall holder, hold it against the wall at the intended
spot like drawing, and mark the positions of the fastening
holes with a sharp pencil.
• Ensure that the holder is vertical and that the holes are clear
of electric cables and pipes.
• Drill the holes at the marked points and insert plastic pougs.
Then screw the wall holder in tight.
• Slide the fan heater (while holding it vertical) into the wall
holder by its rear face until it can be heard to engage.
To remove the fan heater, press the release button [X] while
pulling the heater forwards.
... to neighbouring objects, walls and
ceilings
Prestige HL