Operating The Blower; Battery Pack And Charger - Oregon BL300 Manual De Instrucciones

OREGON® Cordless Tool System
BLOWER MODEL BL300

OPERATING THE BLOWER

BATTERY PACK AND CHARGER

WARNING: TO REDUCE THE RISK
OF SHOCK, DO NOT CHARGE THE
BATTERY PACK IN THE RAIN.
BATTERY PACK LED CHARGE-LEVEL
INDICATOR
The lithium ion battery pack is equipped
with an LED charge-level indicator . To test
the charge level of the battery pack, press
the indicator button on the battery pack's
face (Fig . 5) .
No lights: recharge .
One steady green light:
less than 25% charged .
Charge battery pack before use .
Two steady green lights:
26–50% charged .
Three steady green lights:
51–75% charged .
Four steady green lights:
76–100% charged .
FIG. 5
INDICATOR BUTTON
INDICATOR LIGHTS
CONNECTING THE CHARGER
If the charger includes a separate power
cord, connect the charger cord to the
charger and to the proper electrical outlet
(Fig . 6) .
FIG. 6
AA 1214 - F/N 571703
OPERATING THE BLOWER
Only use the cord set that was supplied
with the charger . At first use, verify that
the plug type matches the receptacle .
CHARGER LED CHARGE-STATE
INDICATOR
The battery charger is equipped with
an LED charge-state indicator that
indicates the state of charging as
well as conditions that may delay or
prevent charging (Fig . 7) .
Note: Until a battery pack is inserted, no
lights will be visible .
Blinking orange light: a fault
condition exists . There are
several potential causes . See
"Troubleshooting" in this manual .
Steady orange light: the battery
pack temperature is beyond the
acceptable range (0°C/32°F to
40°C/104°F) . Allow the battery pack
to reach the acceptable
temperature range before
charging . The pack may be left on
the charger as the temperature
adjusts . Charging will begin when
the proper temperature is
reached .
FIG. 7
Blinking green light: battery pack
is charging .
Steady green light: battery pack is
ready for use .
17