Jøtul F 118 Manual De Uso página 21

ENGLISH
Installation manual with technical
data
1.0 Relationship to the authorities ........... 20
2.0 Technical data....................................... 20
3.0 Installation ............................................ 21
4.0 Service .................................................. 22
5.0 Optional Equipment ............................. 22
6.0 Information .......................................... 22
7.0 Operational problems - troubleshooting 23
8.0 Recycling .............................................. 23
9.0 Guarantee terms ................................... 23
Figures/Pictures ............................................ 44
Register your fi replace at jotul.com for a
25-year warranty.
On all our products there is a
Product:
Jøtul
label indicating the serial number
Room heater fired by solid fuel
and year. Write this number in the
Standard :
Minimum distance to adjacent combustible materials:
Minimum distance to adjacent combustible materials:
place indicated in the installation
Emission of CO in combustion products :
Flue gas temperature
:
Nominal heat output :
instructions.
Efficiency
:
Operation range :
Fuel type :
Operational type :
The appliance can be used in a shared flue.
Always quote this serial number
Country Classification Certificate/ Approved by
standard
when contacting your retailer or
Norway Klasse II
Jøtul.
SP Sveriges Provnings- och
Sweden SP
OGC
Forskningsinstitut AB
SP Swedish National
Testing and Research
EUR Intermittent EN
Institute
Follow user`s instructions. Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlenen Brennstoffen.
Respectez les consignes d'utilisation. Utilisez uniquement
les combustibles recommandés.
Serial no: Y-xxxx, Year: 200x
Serial no.
Manufacturer: 221546
Jøtul AS
POB 1441
N-1602 Fredrikstad
Norway
1.0 Relationship to the
authorities
Installation of a fi replace must be according to local codes
and regulations in each country. All local regulations,
including those that refer to national and European
standards, shall be complied with when installing the
product.
Instructions for mounting, installation and use are enclosed with
the product. Prior to using the product the installation must be
approved by a qualifi ed person.
A product data plate in heat resistant material is located on the
heat shield under the product. This contains information about
identifi cation and documentation for the product.
2.0 Technical data
Material:
Finish:
Fuel:
Log length, max.:
Flue outlet:
Flue pipe dimension:
cross section
Flue pipe adapter Ø150:
Approx. weight:
Optional extras:
Product dimensions, distances:
Technical data according to EN 13240
Nominal heat output:
Flue gas mass fl ow:
Recommended chimney draught: 13 Pa
Effi ciency:
CO emission (13% O ):
2
Flue gas temperature:
Operational type:
Intermittent combustion in this context means normal use
of the fi replace, i.e. fuel is added as soon as the fuel has
burnt down to a suitable amount of embers.
Wood consumption
Jøtul F 118 has a nominal heat output of 8,0 kW. Use of wood,
with nominal heat emission: Approx. 2,5 kg/h. The size of the
logs should be:
Kindling:
Length: 20-40 cm
Diameter: 2-3 cm
Amount per fi re: 8-10 pieces
Firewood (split logs):
Recomended length: 30 cm
Diameter: Approx. 8 cm
Intervals for adding wood: Approx. every 48 minutes
Size of the fi re: 2,0 kg
Amount per load: 2-3 pieces
Nominal heat emission is achieved when the air vent ca.
75% open and the rear air vent is closed.
Cast iron
Black paint
Wood
60 cm
Top, rear and side
Ø125 mm/123 cm
2
Ø150 mm/177 cm cross
2
section
145 kg
Heat shields
See fi g. 1
8,0 kW
8,4 g/sec
73% @ 8,0 kW
0.23%
301 o C
Intermittent
21