Remote Access - Velleman CAMIP22 Manual Del Usuario

8.3

Remote Access

1. Open the [Settings] tab on top of the interface.
2. Click [Network] > [IP Configuration] on the left side of the interface. Uncheck the [Obtain IP DHCP]
case.
3. Click [UPnP] and [DDNS] and enable both functions.
V. 02 – 04/06/2015
CAMIP22
Uncheck the [Obtain IP DHCP] case.
Enable the UPnP and DDNS functions.
8 ©Velleman nv