Velleman CAMIP22 Manual Del Usuario página 9

4. Click [Port] and choose your camera in the [HTTPS Port] field.
Enabling the UPnP
Skip the following steps if UPnP is enabled.
1. If there is a UPnP function on your router, click [Forwarding] > [UPnP]. Make sure the status is
enabled.
2. If there is no UPnP function on your router, click [Forwarding] > [Virtual Servers]. Click [Add New].
V. 02 – 04/06/2015
CAMIP22
Choose your camera.
Choose your camera.
Click [Add New].
9 ©Velleman nv