How To Apply These Terms To Your New Programs - Yamaha RMio64-D Manual De Instrucciones

USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE PROGRAM TO OPERATE WITH ANY
OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New
Programs
If you develop a new program, and you want it to be of the
greatest possible use to the public, the best way to achieve this
is to make it free software which everyone can redistribute and
change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at
least the "copyright" line and a pointer to where the full notice is
found.
one line to give the program's name and an idea of what it does.
Copyright © yyyy name of author
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty
of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU General Public License for more
details.
You should have received a copy of the GNU General Public
License along with this program; if not, write to the Free
Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301, USA.
Also add information on how to contact you by electronic and
paper mail.
If the program is interactive, make it output a short notice like
this when it starts in an interactive mode:
Gnomovision version 69, Copyright © year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for
details type 'show w'. This is free software, and you are welcome
to redistribute it under certain conditions; type 'show c' for
details.
The hypothetical commands 'show w' and 'show c' should show
the appropriate parts of the General Public License. Of course,
the commands you use may be called something other than
'show w' and 'show c'; they could even be mouse-clicks or menu
items—whatever suits your program.
You should also get your employer (if you work as a
programmer) or your school, if any, to sign a "copyright
disclaimer" for the program, if necessary. Here is a sample; alter
the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the
program 'Gnomovision' (which makes passes at compilers)
written by James Hacker.
signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your
program into proprietary programs. If your program is a
subroutine library, you may consider it more useful to permit
linking proprietary applications with the library. If this is what you
want to do, use the GNU Library General Public License instead
of this License.
Note on source code distribution
For three years after the final factory shipment, you may request
from Yamaha the source code for any portions of the product
which are licensed under the GNU General Public License by
writing to the following address:
Pro Audio Department, Audio Products Sales & Marketing
Division, Yamaha Corporation
10-1 Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650, JAPAN
The source code will be provided at no charge; however, we
may require you to reimburse Yamaha for the cost of delivering
the source code to you.
• Note that we shall bear no responsibility whatsoever for any
damage arising from changes (additions/ deletions) made to
the software for this product by a third party other than
Yamaha (or party authorized by Yamaha).
• Note that re-use of source code released to the public domain
by Yamaha is unguaranteed, and Yamaha shall not bear any
responsibility whatsoever for the source code.
• The source code can be downloaded from the following
address: http://www.yamahaproaudio.com/
Hinweis für den Zugriff auf Quellcode
In einem Zeitraum von bis zu drei Jahren nach endgültiger
Auslieferung können Sie von Yamaha den Quellcode für alle
Teile des Produkts anfordern, die der allgemein-öffentlichen
Lizenz (General Public License) GNU unterliegen, indem Sie ein
Schreiben an folgende Adresse richten:
Pro Audio Department, Audio Products Sales & Marketing
Division, Yamaha Corporation
10-1 Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650, JAPAN
Der Quellcode wird kostenlos zur Verfügung gestellt; es kann
jedoch sein, dass wir Sie bitten, Yamaha für die durch die
Lieferung entstandenen Kosten zu entschädigen.
• Bedenken Sie bitte, dass wir keine Verantwortung für
Schäden übernehmen, die aus Änderungen (Hinzufügung/
Löschung) an der Software für dieses Produkt entstehen, die
von Dritten außer Yamaha selbst (oder von Yamaha hierfür
autorisierten Parteien) vorgenommen wurden.
• Bedenken Sie, dass die Wiederverwendung von Quellcode,
der von Yamaha an die Public Domain übergeben wurde,
keiner Garantie unterliegt und dass Yamaha keine
Verantwortung für den Quellcode übernimmt.
• Der Quellcode kann von der folgenden Adresse
heruntergeladen werden: http://www.yamahaproaudio.com/
Note concernant la distribution du code
source
Au cours des trois années qui suivent la sortie définitive d'usine,
vous pouvez demander à Yamaha le code source de toute partie
du produit fournie sous licence dans le cadre d'une licence GNU
General Public License en envoyant un courrier à l'adresse
suivante :
Pro Audio Department, Audio Products Sales & Marketing
Division, Yamaha Corporation
10-1 Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650, JAPAN
Le code source vous sera fourni gratuitement. Nous pouvons
toutefois vous demander de rembourser à Yamaha les frais
d'expédition du code.