Thrustmaster Ferrari GT 2-in-1 Force Feedback Manual Del Usuario página 8

Setting the ForceFeedback
On PlayStation 2, your wheel has 3 Force Feedback modes = Power, Medium or Off.
Just press the Force button (6) to switch from one mode to the other.
Note:
- When you select the Power ForceFeedback mode, the led is Red (default mode).
- When you select the Medium ForceFeedback mode, the led is Orange.
- When you select the ForceFeedback Off mode, the led is Green.
"Sequential gearbox inversion" function
In most games, gearshift functions (1) are assigned to the L2, R2 buttons by default.
The "Sequential gearbox inversion" function allows you to assign gear shifting directly to the 2 digital
gearshift levers (1) in 100% of games.
To switch from "Normal sequential gearbox" mode to "Inverted sequential gearbox" mode, press the L1 +
R1 and Force buttons (6) simultaneously.
Note: follow the same steps to return to "normal" mode.
Normal Sequential Gearbox
Note:
- When you select the Inverted Sequential Gearbox Mode, the led flashes red for a few
seconds.
- When you select the Normal Sequential Gearbox Mode, the led flashes green for a few
seconds.
Precision Drive mode
Precision Drive mode has been specially developed with a view to enhancing performance.
Depending on the game, it may help you to beat your best times (and those of your opponents) or make it
easier to successfully complete the different driving events.
This new exclusive mode calculates and redistributes your wheel's various analogy points without
generating any dead zones (as may be the case with other wheels which allow you to adjust their
sensitivity).
Inverted Sequential Gearbox
5/8