Korona 20667 Manual De Instrucciones página 20

5. During the heating process the temperature display will
indicate the resp. water temperature.
6. Once the boiling temperature is reached (default setting is
100°C), the appliance switches off automatically provided
that you have thoroughly closed the lid. Otherwise boiling
water could spill. Danger of serious burns! the indicator
light switches off as well.
Note: The boiling temperature can vary between +/- 3 °C.
7. Lift the kettle (4) off the base (8). The water is now ready
for use.
Note: You can switch off the appliance resp. stop the
boiling process any time by simply pushing the On/Off switch
upwards or by removing the kettle from the base. In order
for the heating element to cool down, wait for approx. 20
seconds before switching on the appliance again.
Attention: the appliance is getting very hot during
operation. Therefore, do not touch the appliance during and/
or immediately after operation. Only use the handle. Danger
of serious burns!
Water left over from a previous boiling cycle can be re-used
in the next boiling cycle. However, always make sure that the
water level is not too low.
During the cooling down process, the temperature
indicator will show the actual temperature of the water.
Always unplug the appliance after use.
20