TROUBLE SHOOTING
Mila indicates problems using a signal beep and via the display.
E01
1. There is no glass jar.
2. The water container is empty.
3. The lid is open or not properly closed.
If the device does not work properly, please check the following steps:
1. Check if the manual was followed precisely and correctly.
2. Check the following table for possible reasons.
3. Check if all fuses are working.
Problem
There is water underneath
the device.
The mixing chamber/bla-
des are not clean after the
automatic self-cleaning
programme.
The beverage tastes sandy.
The mixing result is chunky.
28
E02
4. The collection container must be
Make sure that the water and collection containers are
closed and that the collection container has not spilled
over.
Add a drop of detergent and select the intensive clea-
ning mode.
Gently wipe off by hand with a damp cloth.
Reduce the quantity of ingredients used to prepare your
drink.
Soak the ingredients before processing.
Soak the ingredients and/or chop them before preparation.
Filter out any chunks using a sieve.
Replace the blades.
E03
emptied.
Solution
E04