Chicco KEYFIT BASE Instrucciones De Uso página 30

To fit / remove the sun canopy, press the two
locking / unlocking buttons, located on the
side, as shown in diag. 23.
HOW TO FIT THE CHILD CAR SEAT TO THE
STROLLER
The KeyFit car seat can be fitted to all Chicco
strollers equipped with suitable fixing systems
as a standard (fig. 24A) or to the ones that can
be purchased separately (fig. 24B)
Always check the fixing system indicated by
the manufacturer and compatibility with the
car seat on the instructions leaflet of the
stroller
14. Open the stroller by following the instruc-
tions provided in the relative instructions
manual
15. Lift the sun hood of the stroller, if in use
16. Recline the back panel completely
17. Position the handle of the car seat in a ver-
tical position (fig. 20 A) and fix the car seat
to the stroller by following the instructions
of the manual of the car seat in the relative
paragraph.
18.In order to release the car seat of the stroll-
er, simply press the orange button at the
back (as illustrated in figure 25) and lift the
car seat using the handle
WARNING! The child car seat can be fitted to
the stroller also with the child sitting in the
seat, although the child's weight could make
the operations more difficult.
30