Smart Switch System - Springlane Hanno Manual De Instrucciones

SMART SWITCH SYSTEM

The controller of the mixer has the functions " " (Cleaning), "0" (ON/OFF
SWITCH), A (Automatic), 5 speed levels, and a timer.
Timer
The display indicates how much time of
the selected mixer function remains or
has already passed. The time cannot be
set manually.
Speed controller
The speed controller stops the mixer or
restores the rotation speed.
Important: The device can only be
operated if the controller is initially set
to position "0".
Cleaning function
Clean the container by filling it with max. 800 ml of warm water and max. 1-2 drops
of mild cleaning agent. Close the container with the lid and press the cleaning but-
ton. The programme automatically starts and runs as follows: It runs for 1 minute –
10 times with the pulse function and subsequently in continuous operation gradually
increasing in speed, starting at minimum and ending at maximum speed. Remove
the container from the motor block and subsequently rinse. Repeat the process if
needed.
29