5. Make sure that you do not exceed
the max. filling level.
6. Place the lid on the container and
press it down to secure it onto the
container. The security contact will
not be activated otherwise.
7. Connect the power plug to the
connector.
8. To start the high-performance mi-
xer, set the speed using the control-
ler dial. Select the switch control to
start the high-performance mixer.
Attention: The high-performance
mixer only works if the controller
dial is initially set to "0". Dial the
controller back to "0" if the mixer
does not start operation.
Tip: 800 g of chopped carrots can
be processed at maximum speed
with 1,200 ml of water. Turn the
control dial to "5" for two minutes
and subsequently turn it back to
"0". Wait for one minute. Do not
repeat more often than four times.
Afterwards, let the motor cool down
completely.
32
9. Set the controller dial to automatic
function (A) to select between the
functions "Pulse", "Crushed Ice",
"Smoothie", and "Grinding". The
button you pressed lights up and
the selected programme starts.
Pressing the button again stops the
programme and all four buttons will
light up again. You can now select a
new function.
10. You can measure and add further in-
gredients during operation through
the small opening in the lid, using
the removeable measuring cup with
65 ml filling volume.
11. Let the motor wind down com-
pletely before removing the mixer
container. Never remove it from
the base while the mixer is still in
operation or while the motor is still
running.
12. If you are finished using the mixer,
unplug the device and clean the
container and individual parts.