Operation; Powercure Dispenser Components; Startup; Exchanging The Rechargeable Battery - SIKA PowerCure Serie Manual De Instrucciones

3.

Operation

3.1

PowerCure dispenser components

(Fig. 1)
[1-1]
Speed limiter
[1-2]
Rechargeable battery
[1-3]
Button for releasing the
rechargeable battery
[1-4]
Rechargeable battery capacity
display
[1-5]
Control switch
[1-6]
PowerCure pack in cartridge tube
[1-7]
Cartridge tube
[1-8]
Bayonet sleeve
[1-9]
Hand pad *
[1-10]
PowerCure mixer
[1-11]
Ring *
[1-12]
Cover *
[1-13]
Bayonet lock
[1-14]
Rack
[1-15]
Rack termination *
[1-16]
Adhesive usage level
[1-17]
Locking/unlocking button
* Spare part
4.

Startup

WARNING
Danger of injury
» Remove the rechargeable battery before
all work on the device!
4.1

Exchanging the rechargeable battery

Removing the rechargeable battery
(Fig. 2)
» Press the buttons for releasing the re-
chargeable battery.
» Remove the rechargeable battery from
the PowerCure dispenser.
Inserting the rechargeable battery
(Fig. 3)
» Press the rechargeable battery into the
rechargeable battery holder until the
rechargeable battery is heard to engage.
4.2

Charging the rechargeable battery

(Figs. 4 – 6)
» Insert the mains plug in the mains socket.
» Insert the rechargeable battery into the
charger.
When the LED changes from red to
green, the rechargeable battery is fully
charged and can be used.
4.3

After charging

(Fig. 7 - 8)
» Remove the rechargeable battery from the
charger.
The rechargeable battery capacity display
on the PowerCure dispenser shows the
charge level of the rechargeable battery.
4.4

Application

Starting application
(Fig. 9)
» Press the control switch. The output rate
can be precisely adjusted by varying the
pressure on the control switch.
en
31